how to launch on a motorcycle

Best answer

Start the engine. Squeeze and hold your clutch lever down (located on the left) and push the start button (located on the right). You should hear the blissful sound of your motorcyclecranking up.

People also ask

  • How to start a motorcycle?

  • If your bike is fuel-injected, simply pull the clutch in, and press and hold the start button whether you’re starting hot or cold. Use a bit of throttle when you press start if your motorcycle doesn’t start up first time around.

  • How to start a motorcycle with a clutch?

  • Press and hold in the start button. This is usually located on the right handlebar, near the bottom of where the hand will naturally rest. Try using the throttle. If the motorcycle does not catch and start, try using the throttle while pressing the start button. Make sure to keep the clutch held all of the way in while doing this.

  • Can you jump start a motorcycle that won’t start?

  • There are many reasons why a motorcycle won’t start, so it makes sense to determine whether the battery is the issue before attempting to jump start your bike. Make sure there is gas in your tank. Make sure the kill switch is off. Check that your petcock is on. This mainly applies to older, carbureted bikes. Check your spark plugs.

  • How to start a fuel injected motorcycle?

  • Starting a Fuel-Injected Motorcycle Put the motorcycle into neutral. Don’t worry about the choke lever. Pull the clutch in toward the handlebar. Press and hold in the start button. Try using the throttle.