how to paint motorcycle forks

Best answer


Usequality paint. Keep the paint out of the sun. Keep the fork clean with soapy water. Clean the surface before painting. Apply several thin layers of paint instead of one thick coat.

People also ask


  • How to restore the forks of a motorcycle?

  • Restoring Motorcycle Forks 1 Remove the Forks. The first step is to remove the forks. … 2 Disassemble the Forks. This process will also be covered in a shop manual. … 3 Removing the Old Finish. These forks were clear coated from the factory. … 4 Start Sanding. Sand, sand, and sand some more. … 5 Time to Polish. …

  • How do I change the fork oil?

  • Be sure to get the bolt on the bottom, but keep it finger tight to prevent the fork oil from draining yet. And loosen the cap on top with a crescent wrench, it’s the part with an air valve. Then loosen the necessary bolts on the fork brace and steering stem to let the forks slide out. This process will also be covered in a shop manual.

  • How do you remove the front forks?

  • And loosen the cap on top with a crescent wrench, it’s the part with an air valve. Then loosen the necessary bolts on the fork brace and steering stem to let the forks slide out. This process will also be covered in a shop manual.

  • How do you clean the forks of your forklift?

  • I hung the forks with some rope outside for that part. Sand, sand, and sand some more. I started with 180 grit sandpaper, and then stepped up with wet or dry 400, 600,800, and 1000. Keep the forks pretty wet when doing it.