how to paint motorcycle forks

Best answer


Usequality paint. Keep the paint out of the sun. Keep the fork clean with soapy water. Clean the surface before painting. Apply several thin layers of paint instead of one thick coat.

People also ask


  • How to restore the forks of a motorcycle?

  • Restoring Motorcycle Forks 1 Remove the Forks. The first step is to remove the forks. … 2 Disassemble the Forks. This process will also be covered in a shop manual. … 3 Removing the Old Finish. These forks were clear coated from the factory. … 4 Start Sanding. Sand, sand, and sand some more. … 5 Time to Polish. …

  • What is the best way to paint a motorcycle frame?

  • Sand all the rough spots on the frame, wipe the whole frame off with wax and grease remover, then carefully spray light coats of primer and paint on the frame. I always paint my motorcycle frames black because I like the look.

  • How do you prepare a bike for painting?

  • Use a wire brush/sandpaper/scraper to take off chunks of dirt, mud, grease, etc. Get all the big stuff off of the frame. There will undoubtedly be years or even decades of built up grease and grime. It all needs to be cleaned off completely before you paint. Don鈥檛 cut corners on the preparation.

  • How do you repaint an aluminum bike frame?

  • Carefully tape off all aluminum engine parts, bolt heads, and anything you don鈥檛 want over spray on. Sand all the rough spots on the frame, wipe the whole frame off with wax and grease remover, then carefully spray light coats of primer and paint on the frame.