how to paint motorcycle forks

Best answer


Usequality paint. Keep the paint out of the sun. Keep the fork clean with soapy water. Clean the surface before painting. Apply several thin layers of paint instead of one thick coat.

People also ask


  • How to restore the forks of a motorcycle?

  • Restoring Motorcycle Forks 1 Remove the Forks. The first step is to remove the forks. … 2 Disassemble the Forks. This process will also be covered in a shop manual. … 3 Removing the Old Finish. These forks were clear coated from the factory. … 4 Start Sanding. Sand, sand, and sand some more. … 5 Time to Polish. …

  • How do you fix a bike that has been painted?

  • Sand the frame of the bike so the new coat of paint is able to stick. If the frame has a thick or glossy paint on it, use a low-grit (rough) sandpaper to remove a lot of the old paint. If the frame has a matte paint on it or it鈥檚 completely bare, use a high-grit (fine) sandpaper.

  • How to paint a mountain bike frame?

  • Disassembling and Prepping the Bike Disassemble your bike until you鈥檙e left with just the frame. Remove any labels or decals from the bike frame. Wipe down the frame of the bike before you sand it. Sand the frame of the bike so the new coat of paint is able to stick. Wipe the bike down thoroughly and let it dry.

  • Can you clear coat over spray paint on a bike?

  • Wait a few hours after spray painting before you apply the clear coat. Once the frame is completely dry, spray an even layer of clear coat all over the bike, similarly to how you applied the spray paint. For the best results, apply three coats of clear coat.