how to seal a motorcycle tire

Best answer


The first step is to remove the wheel from the motorcycle. Once the wheel is off, locate the valve stem on the inner side of the wheel and unscrew the cap.Pour the desired amount of tire sealantinto the opening until it is full. Replace and tighten the valve stem cap.

People also ask


  • How to seal a tire on a rim?

  • You鈥檒l know the basics of how to seal a tire on a rim in no time. 1. Remove Your Tire First, remove the tire from the vehicle and lay it flat on the ground. This will make finding the leak much easier since you don鈥檛 need to navigate the vehicle to find damage. 2. Find the Leak

  • What is a tire seal and why is it important?

  • The tire seal, also known as a tire bead, refers to the edge of the tire that sits on the edge of the wheel. Wheels for vehicles have a small groove design where the tire bead rests. If it is not inflated properly, the air pressure can keep the tire bead in this space. In turn, it can cause damage, most commonly leading to a leak along the rim.

  • Can you use the same sealant on motorcycle wheels as cars?

  • Unfortunately, the same sealant used for cars tends to peel off when confronted with the lateral stresses encountered in motorcycle wheels. However, some motorcycle-wheel builders are now sealing wire-spoked wheels for our machines, too.

  • Can I use soapy water to lubricate my Motorcycle rims?

  • This Tech Tip applies to any motorcycle with aluminum rims: If you decide to change your own tires, you can safely use soapy water as a lubricant to dismount the old tire and mount the new tire. However, if your rim is made of anything other than chrome plated or stainless steel, I do not advise you to use soapy water.